|
Post by Mehul Mishra on Jun 24, 2022 17:27:20 GMT
I have been trying to get the detect image to work for months but mini mouse macro is never able to detect the image Has anyone ever been able to get this to work ?
|
|
|
Post by Mehul Mishra on Jun 24, 2022 17:32:22 GMT
Steve Is there anyway you can help me with this ? I load the image on the detect image popup but the image is never detected. Even if i isolate the area.
|
|
|
Post by philranger on Jun 24, 2022 22:41:05 GMT
Wrong forum area, might take longer to be answered (if at all)!
|
|
|
Post by zeak on Jun 27, 2022 4:12:13 GMT
Hi Mehul Mishra,
Is the image in a game or does the image contain transparent parts?
|
|
|
Post by Mehul Mishra on Jun 29, 2022 13:32:42 GMT
Hi Zeak No it isn't I tried to make a video as well
|
|
|
Post by Mehul Mishra on Jun 29, 2022 13:33:16 GMT
Wrong forum area, might take longer to be answered (if at all)! Oh Where should i post ?
|
|
|
Post by philranger on Jul 1, 2022 13:40:33 GMT
Hello,
It’s now ok, a moderator moved it here!
|
|
|
Post by Mehul Mishra on Jul 2, 2022 0:07:11 GMT
Okay thanks Steve Did you get a chance the see the video ? I am open for a zoom call to show you the issue if that helps
|
|
|
Post by Steve on Jul 2, 2022 2:42:37 GMT
Hi Mehul Mishra, I had a look today at your video. Thanks for posting by the way, it really helps this troubleshooting. First thing I’m thinking is your screen scaling. Have a look at this post minimousemacro.proboards.com/thread/578/possibility-detecting-clicking-image-screen. Are you scaling your current desktop screen res? I noticed a big lag when you clicked on controls within MMM. This was odd. MMM should not be lagging at all like that. Is something affecting your performance at the moment?
|
|
|
Post by Mehul Mishra on Jul 2, 2022 22:45:07 GMT
Hi SteveI tried working on 100% resolution . Now it works about 20% of the time. But i cannot pin point why it does not work the other times This is a video of me trying other times Lagging is not an issue that was a one of incident From what i can tell the detect image only works if i take the screen capture from within mini mouse macro multiplle times and i get lucky and there is no transparent overlap of the menu (see video for reference) I does not work if i take the default screenshot tool from windows
|
|
|
Post by Steve on Jul 3, 2022 0:46:52 GMT
Hi Mehul Mishra, Can I confirm your running with MMM version 8.4? I'm not sure why your capture is not working as expected. What are you running this on? A laptop, and if so what resolution. I know you said the performance issues in one of your video's was a one off. Do you regularly has these kind of issues and if so what kind of loads are you running with? I've been assuming your build isn't virtualized. Can you confirm your desktop isn't a VM running through a hypervisor or any remote desktop/VNC software? I ran a quick test with version 8.4 and could not replicate your issue. The screen recording below is from my primary monitor at 1920/1080 res with no additional scaling. The captures both detected first attempt.
|
|
|
Post by Mehul Mishra on Jul 6, 2022 0:14:38 GMT
Hi Steve . As shown in the video i posted yes i am using a laptop with 100% resolution. Display settings are 1920*1080 No the loading issue was one off. I don't regularly have those issues. Infact it is not there in the second video that i posted I am not using a hypervisor or virtualbox. It works 20% of the time with 100% scaling. If you want i can show you the issue on a zoom call. I have two windows laptops the issue is the same in both of them
|
|
|
Post by Steve on Jul 6, 2022 6:04:23 GMT
Can I confirm your running with MMM version 8.4? With version 8.4 the code was tweaked for the detect image function to make it more accurate. If your not use 8.4 download 8.4 and run your code. If your using 8.4 download 8.3.3 from here and see if the older version that carries the original does give you same result.
|
|