|
Post by ProProUser on Dec 11, 2019 9:26:09 GMT
Running multiple instances of MiniMouseMacro (f.e three instances at once) would be great on a dual monitor setup. Triggering 2-3 application at once (on one system) would simply result in 2-3 times the data. Thanks
|
|
|
Post by zeak on Dec 13, 2019 5:21:07 GMT
Hi ProProUser,
I'm not sure what you are asking, from my understanding you can run multiple instances at the same time. I personally have two instances running most of the time that trigger when certain things happen or the other one triggers when I use the quick launch shortcut keys.
|
|
|
Post by PreProUser on Dec 13, 2019 9:08:22 GMT
..indeed, that was an absolute beginner question. The free and pro version do run as multiple instances. I do not know what i was looking at when testing it. (..it might have been the pre Brexit talks on tele).
Thanks, for pointing it out.
|
|
|
Post by PreProUser on Dec 13, 2019 9:23:41 GMT
|
|
|
Post by zeak on Dec 16, 2019 23:07:27 GMT
Hi Steve,
I have noticed a few times that my MMM that is setup to trigger when certain window titles appear seem to get over written by my Quick Launch macros if they have recently triggered. most of the time the trigger MMM runs normally and the Quick launch macros stay in the MMM that I have there for them.
|
|
|
Post by Steve on Dec 18, 2019 1:42:33 GMT
Hi Steve, I have noticed a few times that my MMM that is setup to trigger when certain window titles appear seem to get over written by my Quick Launch macros if they have recently triggered. most of the time the trigger MMM runs normally and the Quick launch macros stay in the MMM that I have there for them. Oh ok. I'll check it out. Cheers for the heads up.
|
|
|
Post by Mehul on Feb 23, 2022 12:18:10 GMT
Could you use multiple instances in the sysinternals multiple desktops? Because i could not with multiple desktops of windows 10 and Dexpot. If the mouse is working on Desktop 1 it stops working on Desktop 2
|
|
|
Post by Steve on Mar 7, 2022 22:04:52 GMT
Could you use multiple instances in the sysinternals multiple desktops? Because i could not with multiple desktops of windows 10 and Dexpot. If the mouse is working on Desktop 1 it stops working on Desktop 2 I haven't tried this and im not familiar with 'Dexpot' but i do know that running MMM through a hypervisor can (most likely will) cut off all your mouse movements. It has somethings to do with the hooks that MMM needs to make to a live desktop (not virtual) to trigger these mouse movements. Saying that though, other aspects of the macro work such as IF conditions and Actions.
|
|