|
Post by Johnc on Aug 19, 2019 21:28:58 GMT
Right now, a Remark can be added in the MMM Macro list view by right clicking and selecting "Add Remark". However, it will not add the Remark to the first line. So a user will have to add it to the 2nd line and then move it up to the 1st line.
Seeing the first line is most often used for revision control, it would be nice to be able to add a remark directly to the first line.
However, I have a workaround, which is to use a "dummy" first remark line always and add the real remark to the 2nd line as follows! Tks!
* | ************************************dummy line * | This is revision 7... * | ... 1 | ...
|
|
|
Post by Steve on Aug 19, 2019 22:01:48 GMT
Hi John, When there is no macro lines adding a remark will put one at the first available line, line 1. When there are macro lines selecting the first macro line and then adding a remark will put a remark after the first macro line, line 2. Your right, you'll need to move the macro remark up one by selecting the remarked macro line with the mouse - then press and hold ctrl - then press the up arrow key to bring it to line 1.
Cheers, Steve.
|
|
|
Post by Johnc on Aug 20, 2019 2:13:05 GMT
Thanks Steve for the pointer! ctrl-up is a good solution. Cheers!
|
|